Support Issue:Not enough print to have the model stay on the bed.
Bed Adhesion Issue:I tried printing this several times, I have 700 print hours on my P1S and years of printing experience. There isn't enough of the part on the bed before the next layers come in. Eventually the print head pulls the tiny single wall up and the whole print comes off. I printed this with a freshly washed plate, with aux fan on and off and on silent/50% speed and nothing helped =(
Thanks for the feedback. Have you tried enabling the brim? I couldn't reproduce this on my machine, but I'll produce a new print profile if that solves your issue
Hey of course a Brim could solve it but this is about the rating of the profile =). Maybe it's a difference between Printers? I have a P1S and the textured PEI bambu plate.
Thanks for the feedback, must be some small variation between printers. I've added another print profile with a brim to help anyone that experiences the same issue as you.