Olaf - I wanna build a snowman! Remixed by Eskalibure

Remixed by

Eskalibure

Toys & Games>Characters

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 3 walls, 15% infill

Designer

5 h

3 plates

4.6(31)

0.16mm layer, 4 walls, 15% infill

5.9 h

3 plates

4.7(14)

Boost

183

501

773

Released

Description

J'ai réuni ici le meilleur des pièces de Olaf en réunissant le merveilleux travail de JamesRX et l'adaptation de andrewwu

Happy snowman Olaf from the movie Frozen.
No extra support is needed.

Sorry for separating the model in so many parts, as I want to keep as much detail as possible with minimum support.
Please follow the assembly instructions to build, remember to glue the right foot as the last piece to adjust the balance, it should stand firmly just by one foot.

High-res model has updated. Full body model, non-pre-supported model and adhesion tenon were added as request.

Have Fun :)

La tête a été adaptée par andrewwu afin de permettre une impression multicolore avec des pièces séparées

Adjust eye brow angle to bed surface.
Copy right eye brow hole to left side.
Rescale eyes to 97%.
Fill hole of head back.

Vous pourrez augmenter la taille a 300% et dans ce cas je vous conseil de rajouter 1 wall

License

CC BY-NC-SA

Olaf - I wanna build a snowman!
by JamesRX is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

CC BY

Olaf (modified head)
by andrewwu is licensed under the Creative Commons - Attribution license.

olaf

Documentation (1)

Assembly Guide (1)

Olaf_instruction02_800b4fba-d839-4c6e-abc7-e93bc2d93ff8.jpg

Comment & Rating (48)

@neamands

Prints well and assembly is relatively simple. I like him :-) eSUN PLA+ (Black, White, Orange); Polymaker PolyTerra "Army Brown"

@AndyF_CH

Print Profile

0.16mm layer, 3 walls, 15% infill

perfect Model, easy to print! thank you!

@N3CRONOMICON

Print Profile

0.16mm layer, 3 walls, 15% infill

total pain to put together but love it.

@martin.smolak

Print Profile

0.16mm layer, 4 walls, 15% infill

great print profile

@eksenz

Print Profile

0.16mm layer, 3 walls, 15% infill

good job. looks nice.

@biodragen

Print Profile

0.16mm layer, 3 walls, 15% infill

Love the idea and printed great. needs some work. The supports for teeth and nose could be better. May not need them if oriented a different way. There are holes that can be used for alignment posts should be included in part of the print, I used filament pieces to aid with this which makes for easier assembly, was not perfect but better than nothing at all.

Other Issues

@markuswelschke

Sehr schönes Model meine Tochter liebt es <3 Dankeschön

@Gameitinfinity

Print Profile

0.16mm layer, 3 walls, 15% infill

Thank you very much, everything worked without any Problems

@Heptanova

Print Profile

0.16mm layer, 4 walls, 15% infill

Quick to print, easy to assemble

@siluvien

Print Profile

0.16mm layer, 3 walls, 15% infill

Objects printed well, but assembly is a bear. Hair and arms don't have holes but small grooves, so difficult to get placed well. Almost drilled out. Daughter liked it. Something to look at not play with though, or you'll be doing lots of fixes :)

Other Issues:Design