Cute Christmas tree with shoes by PrintThatBoii

PrintThatBoii

Art>Other Art Models

Print Profile(9)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

As in picture, No AMS, 0.2mm layer, 2 walls, 15% infill

1.8 h

2 plates

4.9(42)

X1 / P1 - AMS needed. 1 Plate 2 separate printed colors, 0.2mm

1.4 h

1 plate

4.7(42)

A1 with AMS - 1 plate, 2 separate printed colors, 0.2 mm

1.7 h

1 plate

5.0(10)

A1 - 2 plates, 2 Colors 0.2mm layer

1.9 h

2 plates

4.8(10)

Click to see more

Boost

342

515

123

897

995

Released

Description

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want.

note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%.

3D PRINTING:

You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports.
I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes).

If you read this in December, Happy Christmas!

I borrowed the shoes from @FatherLicorice and his cute little ghosts.

Comment & Rating (123)

@Miol76

I guess I printed a few.. No I printed a whole army. Second picture shows a multi material print with the Prusa MK3s and MMU2. Third shows multi material with a Bambo X1 carbon. The face has been created with the Bambu Studio. Only I thing to say for this picture... Do you like my decoration? The last picture shows how big you could go on a Prusa Mini (335%)

(Edited)