DJI O3 CAM(O3 air unit)third edition

DJI O3 CAM(O3 air unit)third edition

Boost
2
8
1

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
1.7 h
1 plate
5.0(1)

0.2mm layer, 4 walls, 15% infill
0.2mm layer, 4 walls, 15% infill
2.7 h
1 plate

Boost
2
8
1
1
31
6
Released

Description

搁置了许久,这次更新只是在原基础上进行修改。
1.前舱重量减小
2.后盖板根据网友(燃烧的小菊花灬)建议推出了双天线版本。
3.后盖版本推出有小孔径和中孔径,适合现有市场绝大说天线的适配
4.这次也为图传天线增添有保护件,但根据网友反馈会有图传遮挡,各位就根据使用情况选择是否选用

(以下为英文翻译,本人不擅长英文,请见谅 /The following is the English translation, I am not good at English, please forgive me)

Shelved for a long time, this update is just a modification on the original basis.

  1. The weight of the front cabin is reduced
  2. The rear cover has a dual-antenna version based on the suggestion of a netizen (the burning little chrysanthemum).
  3. The back cover version has small aperture and medium aperture, which is suitable for the adaptation of most antennas in the existing market
  4. This time, a protective piece is also added to the image transmission antenna, but according to the feedback from netizens, the image transmission will be blocked. You can choose whether to use it according to the usage situation.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
No more