Standing Build Plate and Build Plate Sticker Sheets Holder Remixed by JKSantos

Remixed by

JKSantos

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 20% infill

Designer

5.6 h

1 plate

4.7(18)

Boost

180

Released

Description

This is my Standing Build Plate and Sticker Sheets Holder remix of KG3Dee's Standing or Wall Mounted Build Plate Holder.

I kept the 3-plate holder model but added extra storage for the Build Plate Sticker Sheets.

This model has two (2) versions (both require no support):

Standing Build Plate and Sticker Sheets Holder v1
- This is the one I printed. This version is ideal if the holder is positioned against a flat surface (e.g., next to the printer (left), a wall, a cabinet, etc.)
- Measurements:
  - 12.0" L x 2.85" W x 3.75" H
  - 0.32" allowance on the build plate holders (x3)
  - 0.61" allowance on the build plate sticker holder
- Print time: 5h 29m
Standing Build Plate and Sticker Sheets Holder v2
- This version is ideal if the holder is positioned as a stand-alone organizer (not against a flat surface). This will help prevent your plate stickers from bending.
- Measurements:
  - 12.0" L x 2.85" W x 7.3" H
  - 0.32" allowance on the build plate holders (x3)
  - 0.61" allowance on the build plate sticker holder
- Print time: 6h 24m

My print settings:

Material: Bambu Lab PLA Matte (Charcoal)
Nozzle: 0.4 nozzle
Plate Type: Cool Plate
Layer Height: 0.2mm
Infill: 20%
Infill Pattern: Gyroid
Wall Loops: 3
Wall Generator: Arachne
Avoid Crossing Walls: True - 100%

sticker sheets holder

plate sheets holder

Comment & Rating (27)

@Ron_Solo

mirrored the print, excellent for the RHS of my X1C. I got the print time down to 3hrs 55min, printed at .24 layer height 10% gyroid infill. wish I could rate the print, but it had syncing issues with the server.

(Edited)

The designer has replied

@JKSantos

Hi Ron! Thanks for sharing your print! :)

@JCastaPrints

Print Profile

0.2mm layer, 3 walls, 20% infill

1st go had adhesion issues(user error). 2nd print had minor warping but doesn't effect the quality since it sits beside printer on the wall.

The designer has replied

@JKSantos

Thanks for the print + rating! Appreciate the note on the warping issue. Curious - did you print PLA?

@JCastaPrints

Replying to @JKSantos :

Yes printed with Bambu Lab Blue-Grey basic PLA. Ended up printing with brim 0.08mm from part and noticed as it was around 75% the brim started pulling up in the back left corner, possible that I may have had a draft(but no windows open) or just printing a bit too fast for the cooling which caused minor shrinkage/wrapping. would have given you a 5 star since I love the design but it doesn't allow me since it's showing as a failed print in my history and Bambu won't let you give 4 or 5 rating 🤦🏻‍♂️🤷🏻‍♂️

(Edited)

@HighTechRedneck

This was a perfect print to address the issue of what I was going to do with the replacement sheets for my build plate. With the settings using MH Build PLA, worked perfect first time, though I did keep the door open while printing. Thank you very much!!!

The designer has replied

@JKSantos

Thanks for leaving a comment + print photos. Glad to hear you like it thus far! :)

@Stephan.Zaehler

Print Profile

0.2mm layer, 3 walls, 20% infill

Gut zu drucken gutes Ergebnis. Im Nachhinein für meine Zwecke doch zu wenig Platz für Platten.

@TeasleyPrint

Print Profile

0.2mm layer, 3 walls, 20% infill

Nice Addition To The Side Of My Printer

@Kaeferkami

Print Profile

0.2mm layer, 3 walls, 20% infill

sauber schnell gut

@d.doro

Print Profile

0.2mm layer, 3 walls, 20% infill

I love this, I printed one for each of my machines. This is sturdy, yet lightweight! Love the way the plates are staggered and that there is a space for the new stickers.