I love dragons. My wife loves cats. So there it is - behold the mighty dragoncat!

You ask why? Well, because I can.

Feel free to experiment with filament colors, but provided look is guaranteed only with described filaments.

Hint: If you have white with higher TD, you might want to use it!

Hueforge description:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used:

PLA Aurapol Black Transmission Distance: 0.2

PLA Aurapol L-EGO Red Transmission Distance: 2

PLA Aurapol L-EGO Yellow Transmission Distance: 2

PLA Aurapol White Transmission Distance: 3

Swap Instructions:

Start with Black

At layer #10 (0.6mm) swap to L-EGO Red

At layer #14 (0.76mm) swap to L-EGO Yellow

At layer #18 (0.92mm) swap to White for the rest.