I converted my Anycubic i3 Mega-S to dual extrusion, and I was originally working on a guide showing exactly how I did it (since the way I did it is different from what I've seen posted already) but.... an entire guide is a lot of work and I'm not sure I'll get around to it (EDIT: June 18, 2022: I've now added a mostly complete guide) . Until then, I'm just going to post this stuff separately in case someone can make use of it.

I bought a cheap MK8 extruder designed for a CR-10 from Amazon, and I used these pieces to mount it to the left side of my Anycubic i3 Mega-S. I've included two files to attach the motor/extruder itself, as well as some clips and a wire track that allows you to run the wires down the side of the frame and still have it look decent. See the pictures.

These are the parts I used:

Twotrees Stepper Motor Nema 17 Motor High Torque 1.5A (17HS4401) 42N.cm (60oz.in) 1.8 Degree

Amazon link: https://www.amazon.ca/gp/product/B08C268H2M/ref=ppx\_yo\_dt\_b\_asin\_title\_o05\_s01?ie=UTF8&th=1

Anpro MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5

Amazon link (This is for a set of two, but very cheap):
https://www.amazon.ca/gp/product/B07SX19Y65/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s01?ie=UTF8&psc=1

Note that the extruder pack I bought no longer seems to be available, but if you do a search you'll see there are many companies selling what looks like exactly the same one and they're all fairly inexpensive.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.2 I think?

Filament: Filaments.ca EconoFil Something rigid Black

If this design was useful to you, please post a make!

Check out my other Anycubic i3 Mega accessories at: https://www.printables.com/social/55222-tyler/collections/95780