5" Sanding Disc Storage / Holder / Rack
Copyright Claim
5" Sanding Disc Storage / Holder / Rack
Boost
22
62
8
Print Profile(1)
0.16mm layer, 4 walls, 15% infill
Designer
58 min
1 plate
Boost
22
62
8
0
67
70
Released
Description
My version of the disc holder is very light and stackable.
As shown in the picture, the font can simply be adjusted in the slicer
Comment & Rating (8)
All
Print Profile
0.16mm layer, 4 walls, 15% infill
Really like the model. Did have an issue printing with this profile where the clip at the back would keep lifting off the bed. Stopped this by enabling a brim but that added way more than required. Adding a small manual brim to the bottom part at the back would nice.
0
Reply
OK
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
zahlen lassen sich nicht ändern
The designer has replied
0
Reply
sehr komisch, hab doch sogar den Screenshot gemacht.. was geht denn nicht?
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
These have worked well, I did have an issue with the numbers, I wanted them in different color but it turns out that was an error on my part not with the design. I am really happy with how they turned out.
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
Works as intended
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld