Fidget Tri-Spinner Knurled 608 Bearing
Copyright Claim
Fidget Tri-Spinner Knurled 608 Bearing
Boost
4
14
11
Print Profile(2)
0.2mm layer, 2 walls, 25% infill
39 min
1 plate
0.2mm layer, 2 walls, 75% infill
46 min
1 plate
Boost
4
14
11
0
73
118
Released
Description
I marked this as a remix, but I just copied the cap placement because it made perfect sense to put them there. I saw one of these on youtube and had to make it. It uses 608 bearings. I used a block of wood and a hammer to get the bearing in. They fit great.
I didn't love the caps that are part of this file so I made some new ones.
http://www.thingiverse.com/thing:1848330
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
75%
Notes:
I wanted it more solid for the weight. You don't have to print it at 75%
I always design on the wrong plane for printing so you'll have to rotate it on the X axis -90 Degrees.
Category: Other
Documentation (1)
Other Files (1)
SOURCES.txt
Comment & Rating (11)
All
Print Profile
0.2mm layer, 2 walls, 25% infill
nice detail. i printed in asa. bearings are snug, also had to use a hammer. the caps don’t fit though - they’re too small. i’ll experiment with scale.
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
Print was great, mine just doesnt spin well because im using subpar bearings from amazon
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 75% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 75% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 75% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 75% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld