This modern hook prints flat to the bed (unlike the original design). Not only does this mean it requires 0 supports with no overhang, but it is also super strong as the layer lines are in the ideal orientation.

Even the keyhole slots are designed so that no supports are required.

I prefer to use 2-sided Alien Tape for most hooks around my house. This model supports both keyhole screw mounting (#8 pan head screws) and 2-sided tape mounting with a recess.

Suggest printing at 20%(or more) infill with 4+ perimeter walls. I used a modifier to increase the infill around the middle section where there will be the most stress.

This is “technically” not a remix as I completely made the model from scratch to print it flat to the bed with supportless keyhole slots. However the aesthetic of the hook and the use of keyholes is completely inspired by Printing Liberty's model.