Yet another bag-clip by Steve_3D

Steve_3D

Household>Other House Models

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

Designer

25 min

1 plate

4.9(113)

0.2mm layer, 4 walls, 30% infill

Designer

1.5 h

3 plates

5.0(85)

All 3 set PLA!

1.3 h

1 plate

4.9(20)

one medium clip 0.24mm layer, 4 walls, 15% infill

23 min

1 plate

4.9(15)

Click to see more

Boost

308

519

371

1.3 k

2 k

Released

Description

A very simple and easy to print bag-clip.

Added 3 different thicknesses vor bigger oder smaler bags.

V2.0, 31.12.2023

I sent the bag-clip to the gym over Christmas and it has built up a some muscles 😁. He is now stronger.
What do you think of this muscle-version?

Update 21.01.2024, storage-container

How do you store alle the bag-clips?

Just have a look to my “Yet another bag-clip” container:

https://makerworld.com/en/models/150697#profileId-164385

Comment & Rating (371)

@tinacoffeencats

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

works great nice and strong slides right on the bag. even used one on the red flag on my mailbox to hold a letter! double win!!

The designer has replied

@Steve_3D

haha, cool idea wth the mailbox-flag and the letter. Can you send me a picture?

(Edited)

@tinacoffeencats

Replying to @Steve_3D :

here ya go! works great. I may reprint it out of something other than PLA to last in the Texas sun!

@Steve_3D

Replying to @tinacoffeencats :

@tinacoffeencats thanks a lot 😁😁😁 So cool to see my clip, 8'000 km away from my home, doing a great job 👍

@user_3654435933

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

solid

(Edited)

The designer has replied

@Steve_3D

Looks like PETG Translucent. Lovely guys 😁

@user_3654435933

Replying to @Steve_3D :

Yes, bambu petg translucent, one of my first prints ever :)

@Steve_3D

Replying to @user_3654435933 :

So welcome to the 3D print community 👍

@iomalley24

Print Profile

0.2mm layer, 4 walls, 30% infill

Great model. I'll probably end up with a ton of these

(Edited)

The designer has replied

@Steve_3D

😂😂😂 Send me a picture then. Try also the V2-muscle-version. It's a bit stronger than my first version. I just see, that they are quiet bend. Let the cool down before you use them, especialy if printed in PLA.

(Edited)

@iomalley24

Replying to @Steve_3D :

Yeah the bend is real. I think it is just from use since it gets placed over a pretty thick roll on a chip bag or whatever. They weren't used straight from the bed so I doubt that is the cause. Definitely will try the muscle version but the stretch on these is currently not an issue either.

@Steve_3D

Replying to @iomalley24 :

Thanks for your replay. The biggest chips-bag are the greatest, even they bend the clip 😂

(Edited)

@Amethyst3D

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

Printed in Bambu PLA Basic. Pretty good for smaller bags. Easy to use with it's smooth opening.Mine was a bit fused together though, and needed some coaxing apart before I could properly use it. Thanks!

(Edited)

The designer has replied

@Steve_3D

Thank you very much for your comment. I myself had never a "fused together" issue. Strange. Have a look at the comment below from @vix_uix. He thinks it's "a little big", but you would like it bigger 😉 Did you try to scale it up? So it should definitive not melt together and it would fit also bigger chips-bags.

@Amethyst3D

Replying to @Steve_3D :

Of course! Thanks for the model. Yeah, I think it's a good size for what it is. I bet it wouldn't have fused if I scaled it up like you said though. Luckily I got it unsnapped with some effort without breaking it.

@vix_uix

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

A little big )

(Edited)

The designer has replied

@Steve_3D

Thanks for your 5*-rating. Did you try to scale the clip, so it fits your needs?

@vix_uix

Replying to @Steve_3D :

no, Bacause I forgot watch to size 😂

@warrickb_

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

super easy print and feels strong!

The designer has replied

@Steve_3D

😊 Happy snacking 👍

@warrickb_

Replying to @Steve_3D :

thanks! :)

@danregazzi

Print Profile

V2, muscle-version, 0.2mm layer, 4 walls, 15% infill

My wife doesn't get why I got a 3D printer. I told her "Just think about all the useful things we can make". This was the first useful thing I made (that wasn't just an accessory for the printer). The clips work great so I made a bunch in a couple different colors.

The designer has replied

@Steve_3D

@danregazzi 😂 what a cool story. So I hope your wife is very happy with the clips and you were able to justify your investment in the 3D printer with this colorful guys.

@user_692132006

Boosted

That's true that at first, we might think we got a BambuLab, just to print stuff for our BambuLab :-) It's insane, the number of hours of prints, just to upgrade our printer with mods that are necessary and that BambuLab could have provide...