Funnel for silica dry box by 3D Schoko

3D Schoko

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Version 1: 42,5x24,5 and 17,5x24,5

Designer

2.4 h

1 plate

4.9(16)

Version 2: 44,5x15 and 15x17,1

Designer

2.4 h

1 plate

5.0(6)

Boost

182

120

Released

Description

Funnel for silica boxes with a frame around the funnel for safe placement on the boxes. No need to wobble or constantly hold the funnel.
With a filling quantity display which can be helpful when filling.
The funnels fit many drying boxes, but certainly not all, so be sure to measure your boxes to see if the funnels fit. Dimensions refer to the internal dimensions of the silica boxes.

Update: 02.01.24 new version uploaded.

Dimensions for funnel Version 1: 42.5mm x 24.5mm and 17.5mm x 24.5mm

Dimensions for funnel Version 2: 44,5mm x 15mm and 15mm x 17,1mm

Comment & Rating (32)

@lucyferror

Printed very well. Smaller one scaled down to 98% that it goes inside/outside box easier.

@Fredrik88

Print Profile

Version 2: 44,5x15 and 15x17,1

Perfect fit. Very nice touch with the fill line 👌

@PixelMorpher

Print Profile

Version 1: 42,5x24,5 and 17,5x24,5

Turned out well and works great

@LongracksLabs

mine are 48mm x 20mm. what is the easiest way to get a version that size?

The designer has replied

@Schoko

Hello, I can adjust the dimensions and upload the file to the raw model files. For the dimensions 48X20, are these the measured dimensions or has that already been deducted a little?

@testites

Replying to @Schoko :

48mm X 20 mm is the dry box version from Longracks Labs (Dry Pods and Desiccant Trays for AMS). Would be great if you could upload a new version to fit the other build. Funnel looks fantastic.

@Schoko

Replying to @testites :

Hello, those were the external dimensions. I adjusted the dimensions. The funnels for this are in pressure profile version 2.

@WhiteRAVE

They turned out great. I used v2, thanks for setting that one up.

@hoskins355

Print Profile

Version 1: 42,5x24,5 and 17,5x24,5

Great funnel, just did not fit the desiccant boxes I printed.

The designer has replied

@Schoko

Didn't you measure before printing?

@VaderAG

Beautiful print. Too nice really for it's use 🤣 would love more details on how you did multi colour without the purge tower

The designer has replied

@Schoko

Hello, the cleaning tower can be deselected in the slicer. One can clean the nozzle in the filling of the object if there is one. Or you can set a higher rinsing rate for the nozzle if you are not using a cleaning tower.

@VaderAG

Print Profile

Version 2: 44,5x15 and 15x17,1

fantastic print, perfect for the need