Skyrim 3D Style Beer Pitcher - For Standard Cans

🍻⚔️ Step into the heart of Skyrim with this exclusive 3D beer stein, designed for the true adventurers of Tamriel. Inspired by the rich universe of The Elder Scrolls, this tankard has been carefully crafted to bring the Skyrim experience to your table.

🐉🛡️ Design Features:

Unique Style: Every design element evokes Skyrim's Nordic aesthetic, from rustic engravings to details reminiscent of sturdy taverns and epic stories.

Optimized Dimensions: The design is tailored to fit perfectly into standard 7 x 7 x 12 cm cans, ensuring an authentic and comfortable experience.

3D Print Ready: The model has been optimized for efficient, high-quality 3D printing, allowing for easy reproduction and an impressive end result.

🔨 Ideal for:

Fans of Skyrim and The Elder Scrolls looking to add a touch of their favorite game to their everyday life.

Adventurers looking to incorporate a unique element into their gaming sessions or meetings.

3D modeling enthusiasts interested in creating detailed and functional parts.

🌟 Transform Every Sip into an Adventure:

This decanter is not just a decorative object, but an invitation to live your own Skyrim legends. Imagine toasting in honor of Tamriel's heroes or celebrating your own conquests.

To the Norse!

To print your Skyrim style beer mug design on an FDM printer, here is a detailed guide to the printing parameters:

General FDM Printing Parameters:

1. Material:

• PLA is a good choice because of its ease of use and low shrinkage. ABS is another option, but keep in mind its tendency to warp and its higher venting requirements.

1. Coating Resolution:

• High Quality: 0.1 - 0.15 mm to capture fine details.

• Normal: 0.2 mm for a balance between quality and printing time.

1. Infill (Infill):

• About 20% - 30% should be sufficient for this type of model, but you can increase it if you want more robustness.

1. Printing Speed:

• Between 50-60 mm/s. Slower speeds may improve detail quality, but increase printing time.

1. Supports:

• Depending on the design, especially if there are overhangs or suspended parts, brackets may be necessary. Design the brackets so that they are easy to remove.

1. Temperature:

• PLA:** Extruder: 190-220°C, Bed: 50-60°C.

• ABS:** Extruder: 230-250°C, Bed: 80-110°C.

1. Bed attachment:

• Use 3D printer tape or glue stick if necessary to avoid warping.

Specific Parameters for the Jar:

1. Walls:

• Thick walls to ensure strength and durability of the jug. Consider a wall thickness of at least 1.2 mm (approximately 3 extrusion profiles).

1. Top/Bottom Layers: **

• A sufficient amount of top and bottom layers to ensure the pitcher is solid and water resistant. Approximately 6-8 layers for both.

1. Printing Orientation:

• If possible, print the jar in an orientation that minimizes the need for supports and maximizes the quality of the visible surface.

1. Post-Processing:

• Sanding and/or painting may be necessary to improve aesthetic appearance. For food use, consider using a food safe sealer.

Final Considerations:

• Testing: Make test prints to adjust the parameters to your specific printer and filament type.

• Monitoring: Keep constant monitoring to prevent problems during printing.

• Maintenance: Make sure your printer is properly calibrated and maintained for best results.

Remember, these are general parameters and may need fine tuning based on your specific printer, environment and media.

Video: https://youtu.be/AhptnT0Mkwg