Magic the gathering deck box
Remixed by
Copyright Claim
Magic the gathering deck box
Remixed by
Boost
56
107
33
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
7.3 h
2 plates
Boost
56
107
33
2
225
219
Released
Description
Magic the gathering deck box. holds roughly 80-100 cards depending on whether they are sleeved or not. Use a single rubber band to keep the sliding mechanism closed on the lid. PLEASE DO NOT PRINT LID WITH FACE DOWN. I INCLUDED THE REQ'D PRINT ORIENTATION.
Comment & Rating (33)
All
Boosted
Turned out great. Added some gold and silver rub n buff and a little acrylic wash for a aged and dirty effect.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fantastic!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Awesome results, but need to slow down printing speed, to avoid ghosting
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very nice in a silk pla, but I had to enlarge it to fit 100 MTG cards sleeved
0
Reply
how big did you have to make it for the 100 sleeved cards
0
Reply
Replying to @tyrvings
I think I went 125% and they are SNUG. Would recommend 130%. I also only stretched it on one axis, not all 3
0
Reply
what about the lid
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
What is the main frame off to the side for?
The designer has replied
0
Reply
I'm having trouble understanding what you mean by the main frame.
0
Reply
Replying to @NotJoel
When opening in Bambu, there is an object off to the left that does not show on a build plate. If you zoom out, you will see it. It is called Main-Frame.stl in the objects list. Not sure if this part of the model since it has "Geforce RTX" on it.
0
Reply
Replying to @honseller
Oh, I understand what you mean now. My apologies, I must've used the wrong file. The main frame has nothing to do with the main print.
0
Reply
Bambu Studio says that i have to repair it, because non manifold.... if i want to repair it, everything freezes... is this file corrupt?
1
Reply
Same here
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Best deck box I have ever owned. It came out Great ,and it is so detailed!!!! Thank you!!!
(Edited)The designer has replied
1
Reply
Glad it came out perfect for you. 😃
0
Reply
Does it require supports?
The designer has replied
0
Reply
yes it does. The octopus and the insert where the lid goes require supports
0
Reply
I’d very much like to see this print when you are able to put 100 sleeved cards in it if you get the chance
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld