Fillet Tool - Small (D1-15mm)
Copyright Claim
Fillet Tool - Small (D1-15mm)
Boost
12
25
23
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
Boost
12
25
23
0
106
139
Released
Description
Simple Fillet Gauge Tool from 1mm to 15mm diameter. For 16-26mm diameters, see https://makerworld.com/en/models/26533
For radius based measurements, scale 200%.
If you enjoy you can Buy Me a Coffee
Comment & Rating (23)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
print at 200% so I will be the radius gauge
3
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
came out great even printing in ludacris mode
(Edited)
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
thanks! Needed this quickly for a project!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
no issues with it
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
A real good print. Just clear petg. A smalltalk but useful Tool.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Maße stimmen leider nicht!
The designer has replied
0
Reply
they are diameter (not radius) and correct. Scale 200% for radius.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
einfach zu drucken und tut was es soll. vielen Dank
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
solid
(Edited)0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Works great and printed great
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld