This print is sized to the Qooltek LED light in the link below.

Bambu Studio Settings:

print your normal settings and add normal supports if your settings are not dialed in to take care of the overhangs

Assemble:

Print the Sleeve with normal supports and remove the white housing end piece to the Qooltek LED light. Replace the removed end of the LED with the new printed sleeve and slip the assembly under between the front of the AMS and top glass. the Radius should lineup with the AMS corner radius as you push the bar under the front end.

Print a second to add in the opposite back corner of the AMS as a means to tidy up wiring for the LED light and place the wire through the small channel as it tails off the back end of the Bambu X1C printer back end.

I used a USB LED Light by Qooltek, link below. this was simple enough for my needs as it plugs directly into any USB port to wall adapter.

LED Light Link:

Amazon.com: Qooltek Portable USB 60LED 7W Reading Strips Craft Light Eye-Care LED Desk Reading Lamp with Cool and Warm White Color Light Great for Craft Table, Pianos, Reading, Work Tables,DJ's, Music Stands : Everything Else

Note: you can change the lighting in the camber by locating the light around the bottom end of the AMS unit. most preferably the front end in this case as it allows me to view inside the enclosure or on the same side as the internal LED light to ensure more light on the nozzle to view best light on camera if your away form your printer.

If you enjoy the print and want to leave a donation you can do so on “Cash app” $SG3DP