TR-02《核心架构-Ⅱ型》-Core architecture - Type II TR-02
Copyright Claim
TR-02《核心架构-Ⅱ型》-Core architecture - Type II TR-02
Boost
565
828
113
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
26.6 h
5 plates
A1mini可以直接用.0.2mm layer, 2 walls, 15% infill
30.5 h
12 plates
Boost
565
828
113
25
1.7 k
1.1 k
Released
Description
Documentation (1)
Assembly Guide (1)
说明书终版E_02c699c3-32bf-447b-8859-036636d5a26d.pdf
Comment & Rating (113)
All
刚下载的时候我本以为这套黑色的是反派角色，白色的是正派角色，没想到这个黑色的是核心骨架，看视频16分钟的组装过程，以为一两个小时可以装起来，发现我错了
The designer has replied
2
Reply
你就说成品帅不帅，牛逼不牛逼把.,...
1
Reply
我一开始考虑做一个产品，但是我发现如果做一个产品，体量就太大了。而且不方便我以后出不同的套件，所以我就把装甲和骨架分开了。毕竟模型本身体量太大。。比哥斯拉要大得多。。。
1
Reply
Replying to @StarK
太帅了，再打印一把弓箭玩玩，打印机又要吃灰了
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
pretty awesome model and easy to print
(also looks pretty cool under a blacklight if your tpu is florescent)
(Edited)
The designer has replied
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
changing it to 5*. even though the print profile for the core is not ideal, once you add armor - it's gorgeous!
(Edited)
The designer has replied
2
Reply
比如什么问题？
0
Reply
default Bambu presets for Bambu basic petg didn't work. I was hoping for default presets to work flawlessly with original filament but they didn't. Nozzle became too dirty in the middle of the print. ruined this plate completely. Reprinted everything with sunlu and everything came up way better. Was rating the print profile, not the model. Your models are fire.
0
Reply
Replying to @viosan
适配是一件很麻烦的事情，我的参数，之适合我的环境，机器，和耗材。这三个条件任何一个不符合，打印出来效果都不好。本质上，还是得需要自己去适配自己的耗材参数才可以。
0
Reply
说明书有几处错误；
有几个零部件匹配度不太好，有的需要打磨得比较多；
躯干与四肢的连接建议还是改一改，插入不太方便；
TPU打印的连接件有几处不太合理；
总的来说完成度非常好，很赞的设计。
我依然是用TPU和PTEG打印的，但是外甲是PLA-CF，想二次创作一些翅膀、刀剑等装备中。
The designer has replied
0
Reply
到目前为止我收到很多的反馈中，关于是否需要打磨和四肢链接的插入难度是各有各的。。。。不同的机器，不同的耗材，不同的环境温度，都会导致不同的公差。在这一点，我作为模型设计者肯定是只能基于我自己的机器耗材和环境来设计.....无法预判太多情况，只能说。。尽力了。
2
Reply
对了兄弟，你的双肩和胯骨可能没有安装到位，使劲安装进去，里面有一个卡扣 会扣住。
0
Reply
Replying to @StarK
知道，就是怕公差太大，怼进去后太紧，想修模怕拔出来损坏
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This project is something incredible
All the sheets are well organized; calibrating the workflow is vital for the correct assembly of the parts
The provided instructions are very clear and well-made
Some joints are particularly critical, requiring attention and care during assembly
I want the link to other similar projects immediately so I can build them😍
The designer has replied
1
Reply
作为论坛中第一个完成的人！给你点赞！
0
Reply
02通用01的武装！可以尝试一下！
0
Reply
对了 说明书有遗漏，你放在肩膀上的两个零件，其实属于腰部最底下那块TPU零件上，安装在左右两边。
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
正在打装甲，非常的 Nice！
(Edited)
1
Reply
这个动作太猥琐了
0
Reply
Replying to @EricYC
蹲坑点赞👍
0
Reply
太棒了，给大佬看看我的，哈哈
The designer has replied
0
Reply
点赞！
0
Reply
awesome model thans
0
Reply
好看
0
Reply
用了PLA打了一遍，基本上没问题，除了一两个比较小的部分，按转时要小心点。
The designer has replied
0
Reply
pla小心点也能用，毕竟脆一些
0
Reply
只打两个颜色，等后续再打几套不同颜色的外甲就威水了！！！大神作品必须支持，希望有更多好作品分享，这也是玩打印的魅力跟动力，加油！！
The designer has replied
0
Reply
点赞！
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld