USB C dust cover by luminaeclipse

luminaeclipse

Hobby & DIY>Other Hobby & DIY

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

PLA 0.2mm layer, 2 walls, 15% infill

Designer

8 min

1 plate

4.8(16)

PLA (Slightly looser) 0.2mm layer, 2 walls, 15% infill

Designer

8 min

1 plate

5.0(4)

TPU 0.2mm layer, 2 walls, 100% infill

Designer

10 min

1 plate

4.2(16)

0.19mm layer, 2 walls, 15% infill

8 min

1 plate

Boost

113

278

306

Released

Description

This is made from TPU

I have 3 print profiles each with different dimensional models for different material and tolerances.

1 . Red - is made from TPU flexible material fits snugg in a samsung s22 usb c port
2 . Grey - is made from PLA rigid material fits snugg in a samsung s22 usb c port
3 . Black- is made from PLA rigid material fit is slightly looser depending on printer and material brand used, this profile was set up for a reviewer on this page and has worked well for a few different people.

Introducing our high-quality USB-C dust covers, designed to protect your valuable devices from dust and debris. Keep your USB-C ports clean and safe with these convenient and durable covers. Easy to use and compatible with various devices, these covers are essential for maintaining optimal connectivity.

Warning: Please keep these USB-C dust covers out of the reach of children. They are small and could pose a choking hazard. Ensure responsible use and storage to prevent accidents. Protect your devices and your loved ones with our USB-C dust covers.

Note: Any questions please ask and I will try to answer them for you.

usb-c port protection

type-c connector protection

usb-c dust stopper

usb-c port shield

type-c dust guard

usb type-c dust stopper

usb-c port dust cover

usb-c connector protector

usb-c dust blocker

type-c port safeguard

usb-c cap for cleanliness

type-c anti-dust shield

usb-c dust prevention

usb type-c port shield

usb-c protective plug

usb-c anti-dust cap

usb-c port blocker

type-c connector cover

usb-c dust guard

usb-c plug guard

usb-c port safety

type-c cap for protection

usb-c dust prevention accessory

usb type-c cover for cleanliness

type-c anti-dust stopper

usb-c port dust stopper

usb-c connector safeguard

usb-c dust block

type-c port dust cover

usb-c cap for safeguard

type-c plug blocker

usb-c protective shield

usb-c port sealant

Comment & Rating (55)

@Rayman

Print Profile

PLA (Slightly looser) 0.2mm layer, 2 walls, 15% infill

Printed smoothly and fits on many of my USB C cables and devices. If it fits snug or little bit lose depends on manufacturer.

The designer has replied

@luminaeclipse

Thank you for your review and picture, the print looks awsome in orange i'm please you liked it.

@Rayman

Replying to @luminaeclipse :

The pain is with the slight tolerances which each manufacturer has, So i was happy that you provided 2 version.

@luminaeclipse

Replying to @Rayman :

That's fantastic I worked with a chap who reviewed one of my other profiles to cone up with something that fit one of his devices which needed a slightly different fit. when I come up with the first file it was for Tpu, then I soon realised people wanted to print it out of PLA so had to change the size slightly, then realised by one reviewer here that not all usb c are the same sizes so changed it slightly to fit. Thanks once again for the review, really appreciate it.

@V01tics

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

quick, easy and smooth

The designer has replied

@luminaeclipse

That looks awsome, glad you liked it and it printed okay. Thanks for the review

(Edited)

@GiordyX90

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

printend in petg, perfect on s22

The designer has replied

@luminaeclipse

That's fantastic, thank you for the review - i've not yet tried it with petg, glad it worked okay for you.

(Edited)

@Tobbse612

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

Top

The designer has replied

@luminaeclipse

Thank you for the review, glad you liked it.

@Tobbse612

Print Profile

PLA (Slightly looser) 0.2mm layer, 2 walls, 15% infill

Tut was es soll und hält

The designer has replied

@luminaeclipse

That's perfect, thank you for the review :)

@Kimyo

Print Profile

PLA (Slightly looser) 0.2mm layer, 2 walls, 15% infill

They printed perfectly and fit snugly.

The designer has replied

@luminaeclipse

Thank you for your review and sharing the pictures, I'm pleased it printed okay for you :)

@KnoxNerd

Print Profile

TPU 0.2mm layer, 2 walls, 100% infill

works great and printed perfectly just a long calibration flow

The designer has replied

@luminaeclipse

Thank you for your review and the pictures to go with it, I'm glad it printed perfectly, shame you had a long calibration you can alway turn calibration off just before you print.

@user_1272505

super snug on msi claw. fits but snug as a bug

@Rayman

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

Printed smoothly and fits on many of my USB C cables and devices. If it fits snug or little bit lose depends on manufacturer.

@jerry320320

Print Profile

PLA 0.2mm layer, 2 walls, 15% infill

塞不進太小了

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

USB-C Dust Cover/Plug/Cap

mfischer79

USB-C cover

3D Manufacturing

132

143

USB Plug Cover [Editable Text] Anti Dust

Mittelpunkt Studios

USB-A Dust Cover/Plug/Cap

mfischer79