(SAE) Ultimate T-Handle Hex Key Set Remixed by Marc Elbichon

Remixed by

Marc Elbichon

Tools>Hand Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 4 walls, 25% infill

Designer

41.9 h

26 plates

5.0(4)

Boost

Released

Description

After a lot of work, here is my Ultimate T-Handle Hex Key set, designed in 9 common sizes (¹⁄₁₆, ⁵⁄₆₄, ³⁄₃₂, ¹⁄₈, ⁵⁄₃₂, ³⁄₁₆, ¹⁄₄, ⁵⁄₁₆ and ³⁄₈)

Metric version is available here : https://makerworld.com/en/models/76458
Torx version is available here : https://makerworld.com/en/models/239133
Stand available here : https://makerworld.com/en/models/78304

Print in place, no glue required, handles knurling gives a nice feeling in the hand.

There is 2 handle sizes : One small for allen key from ¹⁄₁₆ to ⁵⁄₃₂ and a large for ³⁄₁₆ to ³⁄₈

It's made to be tight, to avoid the key to move, it should be easy to assemble, but if it is a little hard to screw (example with coated keys, which is a little bigger), a drop of grease or oil on the thread can help.

Give your feedback and post your makes, enjoy!

PS : Feel free to ask other sizes

Update 2024-01-23: Added 0.05, 7/64, 9/64 sizes

Update 2024-01-14: Added 7/32 size

ultimate t-handle hex key set

Comment & Rating (12)

@tammymurphy

Print Profile

0.16mm layer, 4 walls, 25% infill

Awesome project! Prints great with or without the AMS (manually switched filaments). I did have some issues with adhesion when printing the caps but that was probably user error as opposed to a model issue. I chose to do all the cap ends in the same colour (Protopasta Makita Blue PLA). Thanks so much for sharing your great work and adding that extra size for us (7/32).

The designer has replied

@MarcelBichon

Thanks for your feedback! awesome color!

@SalsaVerdeBTG

I'm about to print this, but I see that the 9/64 is the larger size. Since it's between 1/8 and 5/32, shouldn't it be the smaller one?

The designer has replied

@MarcelBichon

No idea which one will fit better, however if you have to print them, just give a try, but you won't have the caps anyway, I can add it if you want

@SalsaVerdeBTG

Replying to @MarcelBichon :

Sorry, I should have said it's the larger size handle (plates 25 and 26). Since the 9/64 size is in between the 1/8 and 5/32, putting them in a rack in the proper order will make it look like ooooooOoOOOOO. Either the 9/64 should be the smaller handle or the 5/32 should be the larger handle, or my OCD head will explode. :)

(Edited)

@MarcelBichon

Replying to @SalsaVerdeBTG :

haha ok I see, I'll give a look

@tammymurphy

These are awesome! Thanks so much for your work! Almost done printing our set and will post pics when I am done. One size request please… 7/32. That is the only one so far that we have in our tool stash that there wasn’t a handle for.

The designer has replied

@MarcelBichon

Just added ;) Thanks for feedback!