A1 Mini Poop/Purge Bucket Bin New Remixed by 3D design shop

Remixed by

3D design shop

3D Printer>3D Printer Parts

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.20mm layer, 3 walls, 30% infill

Designer

8.1 h

1 plate

5.0(1)

Boost

138

268

887

Released

Description

However, I found there were many components to print, so I made some changes. I added a side handle to easily flip it upside down into the trash. I chose to reduce its height and assemble it; now it can be printed on one peace. Last but not least, I created my own Poop Baffle.

No assembly requried. no support.

Everything has been thoroughly tested and works flawlessly.

I printed it with a 0.4 nozzle and 0.20 mm layer height, 30% Lightning infill.

Enjoy!'

Comment & Rating (17)

@Stubkjaer

very nice - printed in petg

The designer has replied

@3Ddesignshop

Jeg kan se du har et meget dansk navn. Så du får lige svaret på dansk :P men ser mega godt!

@Stubkjaer

mange tak 😊 har du flere gode ting til den fantastiske a1 mini? 😅

@nyknyc

Great model! Thanks for sharing!

@Printerchen

nice! 👍

@imjustjade2020

Print Profile

0.20mm layer, 3 walls, 30% infill

@MusicCity3D

Can you raise the walls a bit in the poop area so it can hold a bit more poop? If I run an all night print the thing is overflowing. Seems like there is about an inch of room to play with to raise the front and side walls a bit under the bed.

The designer has replied

@3Ddesignshop

First I want to say thank you for the support! And of course I will definitely be looking at a version 2.0 keep an eye on it here

@MusicCity3D

Replying to @3Ddesignshop :

Thanks maybe a little wider too. Just big enough to print all night because most multi colored prints out there need to print all day and all night.

@Rmkelly74

it keeps saying “ no content yet”

@angelyyo

best bin

@user_3043977719

hey, first off love your models especially the skeleton dragons and would’ve commented there but it had over 200 and I didn’t want it to get lost, I’ve been looking for someone who could try to make something and thought I’d try you when I say some of your models, is there any way you think you could make an slt (uncolored) of either a lavaback or a deathstalker from the ps game wild hearts, thanks if so rlly appreciate it

@msly07

Looks and works great

@wseibert

What size screws to hold the handle on? Would of been nice to use the screws that came with the printer (maybe the ones that we removed from the printer's Z axis holder, since these are extras). So far though, liking the model!