Print Settings:
- Infill: 100%
- Layer Height: 0.08mm
- Base Layer Height: 0.16mm
Color Swapping Instructions:
Start with Black:
- Use black filament for the initial layers.
Layer #6 (0.56mm): Lava Red
- At the 6th layer or 0.56mm height, pause the printer and switch to Lava Red filament.
Layer #7 (0.64mm): Orange
- At the 7th layer or 0.64mm height, pause the printer and switch to Orange filament.
Layer #12 (1.04mm): Yellow
- At the 12th layer or 1.04mm height, pause the printer and switch to Yellow filament.
Layer #16 (1.36mm): Cold White
- At the 16th layer or 1.36mm height, pause the printer and switch to Cold White filament.
Continue with Cold White:
- From layer 17 onward, use Cold White filament for the remaining layers.
Note: Ensure a smooth transition during filament changes to avoid any artifacts in the print.
Additional Considerations:
- Make sure the printer is calibrated and leveled before starting the print.
- Use a reliable 3D printing material compatible with your printer.
- Adhere to proper print bed adhesion methods to prevent warping.
- Monitor the print closely during filament changes to ensure a seamless transition.
- Post-process the printed model as needed for a polished final result.
Happy 3D printing!