“Woman” - Fan Art

inspired by Frank Miller`s legendary Comic “300”

Framed Multi-Color Filament Painting

Profile as seen in Picture 1-3:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #11 (0.96mm) swap to Silver
At layer #20 (1.68mm) swap to Cream White
At layer #33 (2.72mm) swap to Ivory White for the rest.

FOR STLs ONLY:

For STL “Purple_5Color_200…” Picture 4-6:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA Default White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Dark Blue
At layer #23 (1.92mm) swap to Lilac Purple
At layer #29 (2.4mm) swap to Lemon Yellow
At layer #33 (2.72mm) swap to White for the rest.
Print Time: 12h approx.

For STL “Beige_4color_220…” (Pictures 7-9):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Dark Blue
At layer #22 (1.84mm) swap to Orange
At layer #32 (2.64mm) swap to Ivory White for the rest.

Print Time: 10,5h approx.