This is an iPhone cover display stand for your room, you can attach it to a wall and hang your unused cover.
You need:
-6 screws of 1 cm long, to fix the frame to the wall.
-8 magnets 5x2mm
After that you can attach the piece (iPhone base) without glue, but you can also use it.
You need to attach 4 magnets to the piece (iPhone base) and to the two pieces (apple logo) with a drop of glue.
To complete the camera part, you will need 4 more magnets and glue the remaining pieces (camera, flashlight, microphone) with a drop of glue.
After you're done you can stick your covers on the wall and make them useful.
I had several covers in my room that I wasn't using and so I decided to do this project. I hope you like it and that it can be useful to you too!
It is designed to work with iPhone 14 covers, but I think it could also work for other covers (you can modify the cameras as they are a magnetic piece), these are the measurements of the frame 70x144mm.
If you want a simpler design, you can print just the frame and attach the cover to it
If you have a magsafe cover, you can fix to them some magsafe gadget like this powerbank.
If you want to support me: Thanks