The Utlimate Tolerance Test
Copyright Claim
The Utlimate Tolerance Test
Boost
188
383
310
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
25 min
1 plate
A1 Mini profile 0.2mm layer, 2 walls, 15% support cubic infill
22 min
1 plate
0.24mm layer, 2 walls, 15% infill
19 min
1 plate
Boost
188
383
310
2
1.2 k
1.5 k
Released
Description
With this test, you can perfectly understand the tolerance of the thicknesses of your printer, and be sure of the spaces to leave between the walls in order to obtain a sliding insert that fits perfectly. In addition, you can accurately discover what measurements to use to print "Print-in-place" pieces.
Italian:
Con questo test, puoi capire perfettamente la tolleranza degli spessori della tua stampante e avere la certezza di quali spazi lasciare tra le pareti per ottenere un inserto scorrevole che si adatta perfettamente. Inoltre, puoi scoprire con precisione quali misure utilizzare per stampare i pezzi "Print-in-place".
Comment & Rating (310)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Good way to check the printer.
The designer has replied
1
Reply
Thank you 🙏
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
tried in both Petg and pla, with pla was about to get to 5 of 6, Petg 4 out of 6 without modding profile. nice little test
The designer has replied
0
Reply
thank you for your positive review!
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good quality print, I achieved 0.1.
The designer has replied
1
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice model, easy to print.
The designer has replied
0
Reply
Thank you! ✨
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
mi è stato decisamente utile per capire le tolleranze. profilo fatto bene non ho dovuto ritoccare nulla
(Edited)
The designer has replied
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great tool!
(Edited)
The designer has replied
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Test utile e ben progettato
The designer has replied
0
Reply
Prova questo! https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I was able to spin all but the .05.
The designer has replied
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed nicely on A1m
The designer has replied
0
Reply
You should try this one: https://makerworld.com/it/models/56306#profileId-57901
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
exactly as described. 0.1 minimum on P1S with Fillamentum Traffix black
0
Reply
License
This work is licensed under a
Creative Commons Attribution
© 2024 MakerWorld