Dr Doom Mask with Rivets Remixed by pumpkin20303

Remixed by

pumpkin20303

Props & Cosplays>Masks & Helmets

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8.8 h

1 plate

4.9(8)

Boost

114

Released

Description

This is a remix, of a remix, of a remix of an Awesome Dr Doom mask by TimmyCGeek from 2014!, that's 10 years ago!!!

So I basically just wanted to have the mask with rivets printed on it, so I didn't have to add the rivets to the mask later and mess about with any gluing or other work like that. So i just added some spheres onto it using Meshmixer and viola, you're welcome! I just saved you 2.5 hours in Meshmixer or Fusion.

I printed mine in ABS to test out ABS smoothing with Acetone vapour, this was actually my first try at printing with ABS, and of course it came out fantastic, first try on the X1 Carbon.

I used Slim Tree Supports only on the mouth grill and eyes, I was just worried about ripping of the grill when removing supports and didn't really want to do a whole lot of post processing, but the tree supports worked out great.

If you plan to wear this or use it for Cosplaying, consider resizing it. I have a big head, 61cm or 7 5/8 inches and it does not fit my face at all, i would have to resize it to around 125% so just keep that in mind.

Happy Printing!

Comment & Rating (13)

@Q50_Drew

printed great but some of the supports were tough to remove. overall great quality and the layers are almost impossible to see

@Q50_Drew

after some paintwork this came out insane! I love it

@user_2638423352

printed smooth, without incident, photo is after support removal, before sanding. very happy with design, well done! i don't know how to add my printer profile yet!

The designer has replied

@pumpkin20303

Thanks for adding your print. The profiles are for Bambu printers only so you won't be able to add it for an Anycubic printer.

@outofbox11

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@pumpkin20303

looks good, feel free to give feedback so I can improve the profile.

@FilamentMaestro

Print Profile

0.2mm layer, 2 walls, 15% infill

Cool print, supports around the mouth grill were a little tricky removing. Other than that, sweet mask, thank you.

@user_227549618

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolutely awesome print! The supports were a little difficult but if you have a steel dental pick you can make short work of them. Thank you for the awesome design!