PLEASE DO NOT pull both tray out fully at the same time. One tray at a time fully extended is ok.
I have not been able to defy Gravity yet haha. Unless if you use some double sided take at the bottom and then yes, the tape will allow you to deft Gravity and pull both tray out at the same time although i don't know why is there a need for both trays to be out at the same time?
Do ensure the connection in these parts shown in the photo below is properly knocked in before proceeding to the next step.
Please take 1 piece of the support beam and add a small dab of glue here.
Attached the support beam with glue to this part where my hand is holding. This is the only part that required to be glue however feel free to glue all support beam if you want it to be mre stable.
You can use some double sided adhesive tape at the bottom to prevent the Egg Tray to slide around.
Enjoy.
Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!
- AMS FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction) (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)