How to build the LED Christmas Tree:

What you need:

• 5 pixels of WS2811 (5V) LED chain
• A NODE MCU or some other ESP8266 controller
• 3 M3x10mm screws to srew the bas to the tree
• 4 M2.5x10mm screws to screw the NodeMCU to the base

How to flash your ESP:

• go to https://kno.wled.ge/basics/getting-started/ or https://install.wled.me/
• follow the instructions to flash the ESP
• if you have problems and need help, contact me :)

How to build:

• glue the 5 LED pixel in place
• connect the 3 pins from the LEDs to the Node MCU, ground to GND, signal to D4 (by default) 5V to VU
• screw the NodeMCU onto the base
• try if everything works
• screw the lid onto the ground of the module

Have fun with this project! If you need help at any point feel free to contact me!