Articulated dragon with movable jaw by Tomasz Janota

Tomasz Janota | TomsDragonPaws

Art>Sculptures

GIF

Print Profile(7)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Merged_eyes 0.2mm layer, 3 walls, 20% infill

Designer

4.6 h

1 plate

4.6(34)

Merged_jaw, 0.2mm layer, 3 walls, 20% infill

Designer

4.5 h

1 plate

4.9(10)

No_eyes, 0.2mm layer, 3 walls, 20% infill

Designer

4.7 h

1 plate

4.6(5)

A1 mini movable jaw seperate eyes 0.16mm layer, 2 walls, 15% infill

5.8 h

2 plates

5.0(10)

Click to see more

Boost

482

758

1.8 k

698

Released

Description

Fully movable dragon with a movable jaw

ATTENTION:

There are a few version

No eyes -> dragon with movable jaw and no eyes; here you can insert glass eye or you can print separate eyes (raw stl)
Merged eyes -> dragon with movable jaw with merged eyes; you don't need to insert eyes
Merged jaw -> dragon without movable jaw; with merged eyes

SCALE:
100% scale is for glass eye 6mm; you can resize the dragon if you need

ASSEMBLING the head
Everything is printed in place except the movable jaw and eyes depending on the configuration
If you have the No Eyes version, I recommend gluing the eyes first (with glue or modeling clay) and then painting/attaching the jaw

COMMERCIAL LICENSE
I do not allow the sale of files or printed models, both original and remixed; If you want a commercial license to sell prints, please contact me

Buy me a coffee

p.s. I'd love to see your versions, so share photos of your prints! :)

Comment & Rating (86)

@kongtiaohjw

Sorry,English is not my first language. so, I try to explain clearly. I was download the "no_eyes" model. Try 3 times to print it, but it always unable to stick on heat bed, finally I found the first layer had some problem. I cut 2mm bottom of the model.I think it's been fixed. AND The moded is really coooooool. Thank you. I will upload 3mf on website. Hope you enjoy it.

The designer has replied

@PrintGeggo

I had the same problem and gave up after the second try. Thank you for your comment. I'll try it again when I get the chance.

@tomasz.janota23

Thank you for uploading this version! :) Nice photos! :)

@klucas1879

I printed your version and it came out good. I used Amolen Tri-colored silk PLA for the body and jaw.

@SpacemanSpiff

One of the most detailed articulated dragon on Makerworld, very cool model and looks great in silk PLA. I'd consider scaling it up a tad when printing so the joints are a little thicker. I added a profile that where only the jaw and head have supports, and custom-made brims for the eyes and jaw so you don't have to be cutting them off the whole dragon. Check out my Dragon Fire! remix also.

The designer has replied

@tomasz.janota23

Amazing! I love your dragon and fire. I will print it soon! :)

@crashish

tried to load your profile in orcaslicer but it says variable layer height is not supported with organic supports.

(Edited)

@NormaJean

Came out great! Thanks

@Proki34

Print Profile

Merged_jaw, 0.2mm layer, 3 walls, 20% infill

Looks good:), head wobbles a bit when standing, the supports took quite some time to get rid of.

The designer has replied

@tomasz.janota23

Hi! Thank you for the print and photo. I will look at the head and make a flat version so as not to wobble

@robertsbrian420

Print Profile

A1 mini movable jaw seperate eyes 0.16mm layer, 2 walls, 15% infill

did the eyes in black,red silk pla made it pop!

@user_4143654333

Print Profile

A1 mini movable jaw seperate eyes 0.16mm layer, 2 walls, 15% infill

Perfect design, very good printing profile, no flaws - but raft can be helpful :)

@Flolamontagne

Very good model, zero problem on the print. Nice job !

(Edited)

@user_4210341501

Print Profile

Merged_eyes 0.2mm layer, 3 walls, 20% infill

Turned out great in Silk PLA! Thanks!

@fijter

Print Profile

No_eyes, 0.2mm layer, 3 walls, 20% infill

Great model, looks amazing. The print profile itself could improve a bit I think. They initial layer is quite empty by default (could slice off a bit I guess) and the last couple of links of the tail broke off directly from the building plate due to being too brittle (this is partly due to using Silk filament as well). The Jaw is too weak too by design in the orientation from the print profile and had to be done differently to not break. Overall a great print.

@Rannohrann

Print Profile

No_eyes, 0.2mm layer, 3 walls, 20% infill

print turned out amazing, definitely the most detailed dragon I have printed, support was a pain to get off and I lost a couple toe nails but other than that it’s an amazing dragon