NOTICE: REMIX ARE NOT ALLOWED

NOTICE: DO NOT POST ANY OF YOUR PROFILE

I design a cover for the original AMS BUFFER.

I designed the cover to prevent dust from getting inside the AMS BUFFER and to prevent it from getting scratched.

You need just two longer screws.

I have printed with Bambu Lab ABS black on the original Bambu Lab Textured plate.

NOTICE:

I ALSO HAVE A SECOND BAMBU LAB P1P - P1S - X1C -X1 - X1E AMS BUFFER COVER WITH BAMBU LAB LOGO BUT NOT MIRRORED.

CHECK THIS LINK:

https://makerworld.com/it/models/128521#profileId-139173

NOTICE:

THIS IS A SIMPLE PRINT. AS YOU SEE IN THE PICTURES , MY MODEL STICK VERY GOOD ON THE BED. SO BEFORE YOU GIVE BAD RATING TO MY PROFILES, BE SURE YOU HAVE A GOOD BED ADHESION AND ASK TO YOURSELF , WHY YOU DON'T HAVE A GOOD BED ADHESION. I DON'T WANT TO UPLOAD A LOT OF PROFILES FOR EACH SINGLE PROBLEM YOU HAVE AND FOR EVERY SINGLE MODEL! EVEN YOU WANT TO SHARE ONE , IT DOESN'T MAKE SENSE FOR THE SIMPLE MODEL ITSELF!

PLEASE, LIKE I SAID THE MODEL STICKS ON THE BED EASY! NOT ALWAYS REDUCING THE SPEED CAN HELP YOU TO STICK EVERY MODEL ON THE PLATE! THANK YOU FOR THE UNDERSTANDING!

If you have problems about this model, just send me a private message and I'll help you.

Give me a like and follow my page.

Thank you to support me and happy printing.