Zoom Phone Tripod (Improved) Remixed by LoboCNC

Remixed by

LoboCNC

Tools>Gadgets

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

1.4 h

1 plate

4.7(44)

Easy color - 0.2mm layer, 2 walls, 25% infill

1.5 h

1 plate

5.0(6)

0.2mm layer, 4 walls, 20% infill

1.9 h

1 plate

5.0(2)

painted

2.7 h

1 plate

Boost

339

346

Released

Description

This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws grip more securely, and they also pull the phone in against the threaded stem to keep it from flexing.

Print one of each piece, except print two of the plain legs. The leg with the clip, and also the jaws, each have small built-in break-away supports that needs to be removed. Snap the legs into the sockets, screw the ring down over them, and then feed the stem up through the center, sliding the jaws over the stem, and then finally adding the knob.

Tightening the knob both clamps the phone in place and provides friction for holding the tilt angle. Adjusting the lower threaded ring lets you adjust the angle of the legs. Moving the top knob all the way to the top lets you push the stem in and hook the little nub on the end onto the hooks on one leg for tidy storage.

phonestand

Comment & Rating (62)

@mrunion

Printed great! Impressive color options. I printed this in matte PLA on my X1C. Here is a timelapse of the print: https://youtu.be/YpX_VrKDEnk

@Mentech

Hello, the threads bothered me a bit, they were very tight, I would definitely give them a bit more clearance, but it works great

@user_1265934761

Print Profile

0.2mm layer, 2 walls, 15% infill

Très bien

(Edited)

@RcNeil

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

excellent print

@kenkamm

Print Profile

0.2mm layer, 2 walls, 15% infill

Super handy little tripod! Works great with just about any phone because it's highly adjustable.

@AMT_MW

I still like that model a lot and now had a reason to print a second one. While I am on it, the old one from PETG got a bit slippery in the joint - a piece of sandpaper made it better than ever. Decided to add my easy color print profile as well, thanks for the model again :)