Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic by erickson85

erickson85

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 3 walls, 30% infill

Designer

2.1 h

1 plate

4.6(42)

0.24mm layer, 3 walls, 30% infill

Designer

2 h

1 plate

4.7(19)

0.2mm layer, 2 walls, 15% infill

2.4 h

1 plate

4.7(3)

Boost

198

379

1.1 k

437

Released

Description

Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace.

Thanks to its magnetic attachment, the Purge Poop Slide is easy to attach and remove, while also allowing it to move effortlessly with your printer. This is especially beneficial if your printer has anti-vibration feet and tends to oscillate during printing, as the slide stays in place and moves with the printer, ensuring stability and reducing any potential rattling noises.

Print Time:

±2h10m

BOM:

15x Magnets (glue them in place)
- I have included two designs depending on the magnets you have.
  - 8 to 10mm W x 1.8mm D
  - 6 to 8mm W x 3mm D

Note: When selecting the bucket make sure there's enough space because my machine sits higher due to the squash ball feet. If your machine uses the standard feet and only has about ±30mm of space, use the bucket I've included that has a special cut-out for this

Print instructions:

.24 layer
3+ perimeters
Arachne Wall Generator
±30% infill
Lightning Infill Pattern
No Support
PLA / PETG

Comment & Rating (76)

@dcuellar44

Where is the bottom tray?

@M3HNGRY

I'm looking for the same thing LOL

@CTeipen

Replying to @M3HNGRY :

I took this one https://www.printables.com/de/model/537359-remix-bambu-lab-x1-carbon-x1c-purge-poop-slide-mag

@cpifer92

Click on "Raw Model File"

@CTeipen

I wasn't sure if printing without support would come out great, but here we go! Thanks for the model!

@M3HNGRY

Where did you download the tray?

@Figo75

Print Profile

0.24mm layer, 3 walls, 30% infill

Work Fine 👍

(Edited)

@BGWorks2

Print Profile

0.24mm layer, 3 walls, 30% infill

worked very well. Having to glue the magnets on was a little time consuming but allowing me to scoot the printer back was grate and the chute seems to have a great angle. I printed another’s box that looked good together but had you cut the edge to fit the chute

@Roniak

Print Profile

0.24mm layer, 3 walls, 30% infill

my magnets were too big but it's good enough

@burgART

Print Profile

0.24mm layer, 3 walls, 30% infill

designe sehr gut, druck ist auch top, aber das die Magnet Löcher auf der anderen Seite durchschimmern find ich nicht so gut gelöst. Würde mich auch über ein designe ohne Löcher freuen 👍🏼

@Nanodesigner

Print Profile

0.24mm layer, 3 walls, 30% infill

Profilo buono si stampa bene

@Nanodesigner

ottimo si stampa bene con questo profilo

@Henleo

Amazing print and design. I just ordered the magnets but I am wondering where the file for the actual basket is?

@pulsardesigns

Print Profile

0.24mm layer, 3 walls, 30% infill

Printed well, solid and sturdy. I didn’t have the right magnets so I fitted smaller ones in the holes with printer adapters. A Fusion360 File to make edits would be convenient!

(Edited)