Rotating Jewelry Holder v3 - no supports & < 30 grams by MBRS

MBRS

Household>Decor

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

Designer

1.9 h

1 plate

4.8(21)

Boost

135

141

Released

Description

Currently at its 3rd generation, the model is now support-free, for all the assembly. Weight is about 28.85 grams of plastic.

Assembly is incredibly easy and showed in picture 3, the base has a screw top, on which you should first insert the ring display and then screw the cap. That's it!

I tested this holder with BambuLab Silk PLA, a generic PETG and a generic PLA. All of them came out functional and stable.

Let me know if you like it!

Comment & Rating (23)

@emincan.ipekci

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

@Labricoledescot

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

(Edited)

@PRINT3DGIFTS

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

i really love this one!!

@PRINT3DGIFTS

remixed it if you don't mind :)

@elegantstitches

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

heavily modified to suit my needs but it worked great.

@Ber3D

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

Felt on the ground and broken… 😭. have to restart and probably try bigger

@user_1238349900

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

It prints good No mess up

@NickR1983

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

It's ok. Not sturdy enough and the knob was to tight.

@kaystarcreative

Boosted

This is easily the best of its kind that I have found to date. The only thing that would make it better? If it had the pieces to stack 2 or 3 levels tall. That's my ONLY critique. Otherwise flawless print and perfect function

@BeagleBros

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

came out perfect!

@warrickb_

Print Profile

PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill

Like that there's no support, but had to slow things down for these arms to print without lifting. glad that this is a quick print, most comparable models take 8x as long.