k2thestank

PXL_20231111_024348909.jpg

PXL_20231111_024351450.jpg

plate_1.webp

plate_1.png

Print settings:<ul><li>3-4 walls</li><li>5 Top/Bottom layers</li><li>0.2mm layer heights</li><li>20-45% infill</li><li>ABS or PETG preferred</li></ul>

0.24mm layer, 3 walls, 5% infill

Print settings:<ul><li>3-4 walls</li><li>5 Top/Bottom layers</li><li>0.2mm layer heights</li><li>20-45% infill</li><li>Tree Supports</li><li>ABS or PETG preferred</li></ul>

0.2mm layer, 3 walls, 25% infill, Supports Needed

Materials:<ul><li>Rubber Band</li><li>M3x12 bolt</li><li>Heat insert (optional)</li></ul>&nbsp;Print settings:<ul><li>3-4 walls</li><li>5 Top/Bottom layers</li><li>0.2mm layer heights</li><li>20-45% infill</li><li>ABS or PETG preferred</li></ul>

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models

Purge Lines Broom

Broom Holder

Gravity Broom Holder-Remixes

Easy door striker step!

Broom Holder - for Doors