Haven't found an organizer that I liked, so I made my own.
My goal was to fit everything in as few boxes as possible and to speed up preparation.
If the cards storage is too big for your printer: There is a splitted version (card_storage_1 + card_storage_2)
I uploaded some models and replacements for sleeved cards (print profile is also available)
You should fit sleeved cards now (with up to 60 microns sleeves). I do not have sleeves myself, but i measured everything. You can check if your cards fit:
Cards | max. height of deck of sleeved cards |
Explore Wild Hunt | 19mm |
Event Wild Hunt | 19mm |
All big cards | 23,5mm |
All other cards | 560mm (4x140mm) |
For unsleeved storage:
For sleeved storage:
Sleeved cards do fit. However 60 microns fit pretty tightly. So I recommend using 40 microns sleeves with this inlay