I made this so I use some solar landscape lights on a fence rail & post.

The plate is pressure fitted into the groove.

Print in ASA or similar filament

Res: 2

Infill: 20

Walls: 8

Print Time: 2 Hours

Lights I used are: https://amzn.to/432jYxq

Lights are 4.5", so the plate should fit many other styles as long as they have that groove around the base. I used two 1" drywall screws to mount to fence.

Note:

Ground Light Plate-Old Style: Will fit lights with No Tabs.

Ground Light Plate-New Style: Will fit both models, but will be a little loose on No Tab lights.

Look at last 2 pictures for details.