Show your support for the brave defenders of Israel with this 3D printed filament painting of Yigal Slavin's photo of the Israeli Defense Forces lighting a Menorah in Gaza. Created with HueForge.

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use Arachne wall generation.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Mandarin Orange
At layer #25 (2.08mm) swap to Lemon Yellow
At layer #33 (2.72mm) swap to Ivory White for the rest.