中国古代乐器——洞箫G调Ancient Chinese musical instrument - Flute Dong Xiao G key
Copyright Claim
中国古代乐器——洞箫G调Ancient Chinese musical instrument - Flute Dong Xiao G key
Boost
81
176
42
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.4 h
1 plate
Boost
81
176
42
1
386
127
Released
Description
中国古代乐器——洞箫G调适合入门The ancient Chinese musical instrument, the Dong Xiao in G key, is suitable for beginners
Comment & Rating (42)
All
Print Profile
0.2mm layer, 6 walls, 30% infill - Tough PLA
Bed Adhesion Issue:Fell off and started stringing.
The designer has replied
0
Reply
That’s rough, though it looks like the print failed pretty early on. White pla is probabbly the hardest color to print due to the titanium dioxide used for the coloration. If you get a chance, try again but make sure to clean the build plate with ipa, use a more forgiving print color (black is probabbly the easiest) and if you have recently upgraded firmware make sure to run a calibration. Also, make sure you are not over riding the print speed using sport mode etc. Guessing you are using Bambu labs pla and their filament profile. if not, spend time dialing in your filament settings as these machines print so fast it’s easy to get under extrusion and filament layers that aren’t high enough in temp to get good layer adhesion. Thanks!
(Edited)1
Reply
Replying to @RPiRgy
Thank you for the feedback! I appreciate it a ton. I’ll try those suggestions later and keep you updated once it finished. I am still early to printing and most likely this was user error.
(Edited)1
Reply
Replying to @DavidTran
Sounds good and happy to help! Everyone is new at some point so no worries. Besides, It’s great seeing 3d printing growing with lots of new people entering the hobby and companies
like Bambu labs bringing printers to market that are forcing pretty much every other company to step up their game :)
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
ok, little loose
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I'm not sure how to play, but very simple to print !!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Reprinted this with supports (on interface) and it turned out great! The brim near the mouth piece was a bit tricky to get off but I was able to remove it eventually!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I printed this right from the app, I did not change any of the preset settings. it turned out great, the pieces fit together nicely and the instrument works. The settings in the file gave my regular PLA a matte finish so that was pretty neat.
0
Reply
Lovely model and fun print, after a quick video tutorial was easy enough to start learning. Author did a great job on the model! Did create a custom print profile to make it easier to print using a decent pla+ or tough PLA (used cc3d grass green pla+ but bambu tough pla should work even better). With the uploaded print profile, added more walls, slowed down wall speeds, increased infill and was able to print without supports. Thanks!
(Edited)The designer has replied
2
Reply
打印配置修改的非常棒，作为刚入门的我学到不少新知识。谢谢！
0
Reply
你也可以按着这个参考图用水管或者电线管制作。
(Edited)
1
Reply
Replying to @user_4119660841
Glad to help and your model making is fantastic! The attachments showing the design of the Xiao are really really neat. Love to see music and arts represented in the 3d printing community. Hopefully this message translated ok. Anyway have a great day and keep up the awesome work, Thanks!
很高兴能帮上忙，你的模型制作太棒了！展示肖设计的附件真的很整洁。喜欢在3D打印社区中看到音乐和艺术。希望这条消息翻译正常。无论如何，祝你今天过得愉快，继续努力，谢谢！
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
吹过笛子，以为洞箫很好吹，打了发现吹不响，而且似乎这还是个左撇子版本 ┭┮﹏┭┮
The designer has replied
0
Reply
找找教程，大概45度，前后从上到下八个孔挡住1、3、7孔容易吹响
0
Reply
左撇子右键镜像就是右手
0
Reply
Replying to @user_4119660841
哈哈，苦练未果中
0
Reply
currently printing this now, I'm super excited to hear her sing.
Is There any chance you would be interested in making a bow flute/staff flute? i have a lot of filament and am interested in the lower notes from the flute.
The designer has replied
0
Reply
我不知道你说的是什么样子的乐器，有图片吗
0
Reply
Replying to @user_4119660841
there are several versions, but most tend to be upwards of 2m long. here is a video of the instrument being played https://youtu.be/TrV4i0hsiVY?si=JIEMprfGx6nvrNg5
0
Reply
话说大佬，有组装教程吗，为啥我组装的那么长
The designer has replied
0
Reply
萧比笛子长，组装很简单了，参考评论区图片
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld