Glass Top Riser - Elevador superior de cristal
Copyright Claim
Glass Top Riser - Elevador superior de cristal
Boost
60
93
22
GIF
Print Profile(2)
0.2mm layer, 6 walls, 65% infill
Designer
57 min
1 plate
ironing, 0.16mm layer, 6 walls, 45% infill
52 min
1 plate
Boost
60
93
22
2
244
122
Released
Description
Is a top glass riser. To install, you have to remove the two screws from the glass handle, then it can be installed without problems. Can be printed with or without AMS.
--------
Es un elevador del cristal superior. Para colocar, hay que quitar los dos tornillos del agarrador del cristal, luego se coloca sin problemas. Se puede imprimir con o sin AMS.
Comment & Rating (22)
All
Print Profile
ironing, 0.16mm layer, 6 walls, 45% infill
Druck hat super funktioniert.
The designer has replied
0
Reply
THX
0
Reply
Works very well. I love how simple it is.
0
Reply
Print Profile
ironing, 0.16mm layer, 6 walls, 45% infill
Easy to print and satisfying with the multi colors :)
Also I find it nice, that it's screwd under the "default handle" so that it can't accidentially slide off.
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
Great print, profile worked very well
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
Everything ok, maybe better tolerance between glass and riser....
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
thx for sharing :)
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
Nice concept. Good print. didn’t really work for me.
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 65% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 6 walls, 65% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld