Bender Stand with quote by Habitaritus

Habitaritus

Toys & Games>Characters

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.7 h

1 plate

4.5(4)

Boost

120

195

378

Released

Description

I created the Bender from this: https://www.printables.com/de/model/73094-articulated-bender

with this remix of the black eyes: https://www.printables.com/de/model/148607-articulated-bender-eyes-remix

The Bender legs was not fitting good and Bender did not have a good stability. So i decided to construct a little Stand with a typical quote of Bender.

Bender sits on the Stand. I glued it on top of the little stand top. I did not glue the feets on the stand. Maybe this would be get a much more better stability.

Comment & Rating (9)

@Samarensis

its too short... 🤔🤔🤔

The designer has replied

@Habitaritus

For me it sits on the stand… I think every Bender is a bit different 🙈 You can cut a bit of the top… Scale z and the reassemble?

@bclancy74

Print Profile

0.2mm layer, 2 walls, 15% infill

Ran into a problem with the stick being a little short on the back end. Luckily I broke the first one and reprinted it. used velcro to attach them and now he's perfect. thanks =)

The designer has replied

@Habitaritus

My Bender sits on the top of the stick and was glued. This was a early Model… I think i have to rework this a bit and write sone better manual where to glue it ☺️ But anyway… Your Bender looks nice and thank you for your rating!!!

@delco4life

Print Profile

0.2mm layer, 2 walls, 15% infill

printed beautifully however it’s too small for the model I printed. I printed the model at 100% scale from Bambu Handy directly so I’m going to have to cut and modify it stand.

The designer has replied

@Habitaritus

Sorry when you have to do some extra work :( I printed Bender in 100%. Maybe there are some different Versions in the meantime? But your Bender looks very nice 👍