Print Profile(1)
![[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US75901df916066f/42516262/instance/2024-01-17_8bce6c91cde63.jpg?image_process=resize,w_100/format,webp)
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
1 h
3 plates
Boost
7
9
5
1
25
26
Released
Description
The following internal diameters are currently available:
20 - 22 - 25mm
if you want other variations ask in the comments
Print settings:
- Nozzle: 0.4 mm
- Loop: 4
- LH: 0.2
- LW: 0.4
- Solid layers: 5
- Infill 15%
I tested printing up to 200 mm/s - acc 10k
it is important to have a well-calibrated printer and not to have seams that are too thick
Comment & Rating (5)
All
Print Profile
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
finger spinner
0
Reply
Print Profile
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
Quallitat super aber leider dreht er sich nicht gut und ist viel zu groß als Ring.
(Edited)
0
Reply
Print Profile
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
good
0
Reply
Print Profile
[All 3 Sizes]: 0.2mm layer, 2 walls, 15% infill
Too big
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld