Simplified the original part to make it stronger and easier to print, while maintaining ease of use.

This is the passenger side one, if you need the driver side one - just mirror it in your slicer (mirror on Z with the default orientation)

File default orientation is not optimal. Check the photos for the optimal orientation with minimum supports.

Print with PETG or higher temp resistant material. PLA also holds but deforms during the hot summer.

Print Settings

Printer:

Bambu Lab X1

Perimeters:

6

Rafts:

No

Supports:

Yes - tree supports

Resolution:

0.2mm

Infill:

50%

Filament:

Azure Film Green PETG