Designed By Zurlingo-3D

A Nice little display piece for any Lilo and Stitch lover! Looks fantastic painted.

All parts are separated into:

• Stitch
• Surfboard
• Wave
• Dolphin 1
• Dolphin 2
• Dolphin 3

Simply glue them together post print.

Print Settings:

Stitch and Surfboard:

Print with support touching build plate at around 60 degrees. Use a brim =< 0.25mm layer height

Dolphins:

Use a brim. 2 of the Dolphins don't need any support. 1 of them you might need to add some, again touching build plate. Smaller layer heights will retain more detail in the mouths. 10% infill

Wave:

No support 20% cubic/ lightning infill. Use a brim. You can also do some filament changes at random intervals here to add some dimension to the wave - e.g. adding some white layers at the surface of the water to give the effect of white water/waves crashing. I found that if you just poke the white filament into the extruder without pausing the print, you can get some really nice blends between blue and white. If you get it right, you can do this multiple times within a few layers.

Thanks for looking! - Please like/review the model, and don't forget to post your makes! :)