HSW Filament sample box
Copyright Claim
HSW Filament sample box
Boost
3
4
0
GIF
Print Profile(3)
both 0.2mm layer, 2 walls, 15% infill, suports
Designer
4.2 h
1 plate
Only outside case 0.2mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
Only Insert 0.2mm layer, 3 walls, 15% infill
Designer
3.5 h
1 plate
Boost
3
4
0
0
3
0
Released
Description
Honey Storage Wall Adapter for Filament Sample Box (Filament Box included) works with filament samples 2mm thick and a maximum width of 35mm; the height needs to be more than 50mm.
The sample box is easily removable from the adapter.
There are holes for magnets (6mm diameter and 2mm depth); I did not use them.
Comment & Rating (0)
All
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld