Xbox Controller Stand with LED Remixed by agepbiz

Remixed by

agepbiz

Toys & Games>Other Toys & Games

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.7(26)

0.2mm layer, 2 walls, 15% infill

2.9 h

1 plate

5.0(2)

0.4mm layer, 2 walls, 10% infill QUICK

1.2 h

1 plate

PLA 0.20mm

1.7 h

1 plate

Boost

389

528

525

262

Released

Description

Simple and clean looking Xbox Controller Stand with LED

Links to the LEDs and Batterybox I used in this project (not affiliated). Some links have several options in them, make sure to select the correct size

300mm 3V LED Filament: https://www.aliexpress.com/item/1005003775632413.html
2x1.5V Batterybox with switch: https://www.aliexpress.com/item/1005003517942515.html
8x2 Rubber Pads: https://www.aliexpress.com/item/1005005297036433.html

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft

15 Bottom Shells to minimize light leak
Support Structures where the batterybox will be attached. Avoid Supports where the LED groove is
0,1-0,2mm layer height

Comment & Rating (51)

@NewfoundPrints

Boosted

great profile, is there a plan for a PlayStation controller? 😇

(Edited)

@Diginet

i have one. maybe i can upload here. but its a remix and i forgot from where i have the original 🙈🙈

@NewfoundPrints

Boosted

Replying to @Diginet :

does it use the same LEDs and battery box? I may have bought a whole bunch when I decided to do the Xbox controller haha

@Der_Becks

Replying to @Diginet :

I would also be interested in the PS5 version. I would like to print both as a Christmas present. :)

@saschaschwarz

Mixed in the Logo

@Zach_peterson4

is there a link to this?

@OppieDesign

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design! Everything fits perferctly in place. Looks better IRL than in the photo :)

@OppieDesign

Great design! Fits my Elite 2 perfectly. Unfortunately I'm bad with taking pictures. Looks much better irl.

@ASackOPotatoes

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits great, looks great. Haven't added the leds but you don't really need to. Looks good just by itself.

@Skribbly

Print Profile

0.2mm layer, 2 walls, 15% infill

great model but if you try to print it directly from the bambu handy app using the designers file it will not work due to an inherit lack of support for the battery insert.

@NewfoundPrints

Boosted

came out in very nicely! had to add supports to the edge where the lip of the battery box sits, but nbd.

@Raw_Egg

Print Profile

0.2mm layer, 2 walls, 15% infill

fits the controllers perfectly but the filament got a little stringy around the led section. (I printed with the P1S.)

@NewfoundPrints

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print and easy profile to use. The only thing I changed was place supports on the lip where the batter box sits. otherwise, great print! can't wait to give these as gifts