No Print Profile yet. Add one to earn points.
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions.
All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed.
The screw holes are all 5mm diameter, with 2mm countersink.
L-brackets:
Corner-braces:
The difference between inside and outside corner braces is seen in the chamfers on the screw holes, and a small fillet on the corner side of the bracket itself. 3d printed parts need a fillet in 90-degree corners for strength.
Print with lots of walls for maximum strength.
I suggest you test-print a bracket before you put them to use, to see if they are strong enough for the intended job. They require very little filament.
The 3mm L-brackets are nice and strong, the 6mm L-brackets are properly beefy!
0.2 mm layer height
lots of walls
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.