Bathtub hair-catcher by mariu5

mariu5

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

9 min

1 plate

5.0(3)

Boost

Released

Description

If you want to avoid fishing hair clogs as big as rats from your bathtub drain, this item is for you.

This small and hidden drain cover should be compatible with most of the standard bathtub drains in the US and will not affect the operation of the plug installed on top. Please feel free to tweak the scale on X and Y axis in the slicer in case you have a custom drain and need to adjust the diameter.

You can use your fingers or tweezers to pull out the cover and clean the hair periodically. The tweezers in the picture can be found here: https://makerworld.com/en/models/52414#profileId-54189

Comment & Rating (5)

@Unforgivenll

Print Profile

0.2mm layer, 3 walls, 15% infill

Bambu Lab ASA Black. Great model thank you!

@TehGoldenFox

Print Profile

0.2mm layer, 3 walls, 15% infill

Lol I think I also need one for the bathroom sink

(Edited)

@TehGoldenFox

Looks great! What type fillament do you recommend printing with?

The designer has replied

@mariu5

I used PLA and PLA+ since are the most common materials, but anything would work for this one. I tested it with very hot water and had no issues. If high temperature is a concern, then use PETG or ABS.