I printed a batch of 45 for my friend who was missing all his yellow trains. They turned out fantastic. The little circular tree supports really helped them stick to the bed, even with moderate to fast printing speeds. Thank you. 

danghaihuynh89

Single Model - 0.16mm layer, 2 walls, 15% infill

Tripleoe

3x21 Models, 3 colors -  0.16mm layer, 2 walls, 15% infill

SSBerman

cblt1314

ben4096

FullSizeRender_9b0b9825-a27d-4f2b-9b03-ff9e99e421d6.jpeg

IMG_5238_5c2cc763-9458-4abc-ab25-d9b63b03f375.jpeg

shaded4colors_b189a37e-aa4f-44df-ba5e-d8b71bd455d4.png

wire_8c25fbe1-d69e-4df6-85ea-39b9ce0974b5.png

IMG_5238_10c7f7cc-c1fa-499e-9ca0-c977d14a2294.webp

plate_1.webp

plate_1.png

<ul><li>Single model on one plate. I recommand to strat with this one before printing loads over night</li><li>I had a few try and failed to figure out the best way to print it and I would advice to keep it straight in it's normal position with 4 custom supports (0.4mm) under it on each side. Doing so you can also Iron top surfaces for a very good finish.</li><li>I printed it with PLA and also ABS on a textured plate. It weight 1.5g and feel sturdy just like the orginal.</li><li>It prints well in 0.16 I tried a 0.08 but I don't think it worth the extra time.</li></ul>

FullSizeRender_d5c2b2fc-60fa-49a8-917b-94cfa6537bba.webp

plate_2.webp

<ul><li>63 models with 3 colors on one plate</li><li>I had a few try and failed to figure out the best way to print it and I would advice to keep it straight in it's normal position with 4 custom supports (0.4mm) under it on each side. Doing so you can also Iron top surfaces for a very good finish.</li><li>I managed to fill one plate with 3x 21 units, using 3 colors.</li><li>It's very important to print per object and not to use AMS per layer, you'll save a considerable amount of time doing so.</li><li>I printed it with PLA and also ABS on a textured plate. It weight 1.5g and feel sturdy just like the orginal.</li><li>It prints well in 0.16 I tried a 0.08 but I don't think it worth the extra time.</li></ul>

Don't ask me about the game I made this one for a friend :) I printed 60 of then in 4 differents colors and he was happy with the results so I figure I could share it. I built the model from scratch with Houdini and it's very close to the original, exact same size but a few minor adjustements to help the print (mostly thicker walls and very slighty exagerated details).

Ticket to Ride - Train

Global

Print Profile(2)

Description

Comment & Rating (4)

License

Related Models

Ticket To Ride - Train Set

Ticket to ride europe

Ticket to Ride Trains and Markers

Ticket to Ride Europe - Train Tray / Plate