车用杯架垃圾桶-筋斗云
Copyright Claim
车用杯架垃圾桶-筋斗云
Boost
34
75
9
Print Profile(1)
0.12mm layer, 2 walls, 15% infill
3.3 h
1 plate
Boost
34
75
9
0
159
40
Released
Description
平时经常会有一些细碎的垃圾需要放置，如果直接放置在车辆的杯架内显得很凌乱，所以专门设计一款翻盖式的车载杯架垃圾桶，翻盖的方式在倾倒时更加方便，同时开口也更大。
1.翻盖需要从地面的支撑；
2.打印材料推荐ABS（车内温度有时候可以达到70°），也可以用PETG；
3.壁厚：≥4周；
最后祝打印快乐！！
Comment & Rating (9)
All
Print Profile
0.12mm layer, 2 walls, 15% infill
Had a hard time putting the cover and had to sand the hinge area to make it fit properly. Apart from that it's a good print 👍
(Edited)1
Reply
这是我以前prusa mk3s时期的设计模型，改天我再优化下壁厚和间隙哈。
(Edited)1
Reply
First I had some strength issues but with some heat i could put it in and now it works great.
The hinge is not to loose so the cover doesn't fall down on it's own.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Strength Issue
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld