Modular Mosspole 40MM for all your climbing houseplants (Fill with sphagnum mos)
Modular Mosspole 40MM for all your climbing houseplants (Fill with sphagnum mos)
Boost
80
157
18
Print Profile(5)
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
Designer
4.4 h
1 plate
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Designer
5 h
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
7.8 h
1 plate
Mosspole 40mm Closed structure - 0.16mm layer, 2 walls, 15% infill
Designer
5.2 h
1 plate
Click to see more
Boost
80
157
18
2
170
150
Released
Description
A 3D printable modular mosspole that can be filled with sphagnum mos.
It exists of 4 pieces.
1. Mosspole with closed structure in the back (to keep moist in for longer)
2. Mosspole with open structure, for more aerea for plants to grow in
3. Groundpin
4. Top cap
Additional parts can be printed to extend the length of the mosspole!
Need a thicker / bigger mosspole? Check out my 60mm mosspole in the link below!
https://makerworld.com/en/models/148232
NOT FOR COMMERCIAL USE!!
Comment & Rating (18)
All
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Great 👍
1
Reply
Print Profile
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
I already printed a few of these, they attach well with each other
1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Printed great, I haven't tested the strength yet but looks good.
1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Wife is happy with it. So am I.
The designer has replied
0
Reply
Nice one! Thanks for sharing!
(Edited)1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Gedruckt via Handy = Super. Nochmal gedruckt via PC = Fehler.. weiß nicht wo das Problem war. man muss vorsichtig sein beim Druck. 166% Schnelligkeit macht der Turm nicht mit. Wackelt und fällt um. Maximal 100%. Auf die letzten Schichten besser nur 50
1
Reply
I wish you had this in a 1" diameter. Every time I try to scale it down it prints very fragile and breaks when I try to screw it together. If you can make one that's strong in 1" diameter that would be awesome. Id even pay you for the file if that's what it took. My neighbor loves this pole but 1.5" diameter is too big for her. Would also love it if the drain hole on the funnel was bigger. Maybe double the size it is now.
0
Reply
请问这个打印需要加支撑吗？
0
Reply
Hello, I really like what you did! can you make a variation of the model with a diameter of 100 mm? please, that would be great! thanks in advance.
0
Reply
Print Profile
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
Langsam drucken, dann geht's. Frau ist glücklich. leider schafft der P1s es nicht, 3 auf einer Platte zu drucken. Hat mir die Türme umgerissen...
0
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Other Issues
The designer has replied
0
Reply
What went wrong? I can not imagine it being a printer error... A bit unfair giving it a one star review if it's user error.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld