Wire Stripper - Utility Blade
Copyright Claim
Wire Stripper - Utility Blade
Boost
54
103
17
Print Profile(2)
25 Min 0.2mm layer, 2 walls, 50% infill
Designer
25 min
1 plate
![[PETG] 0.2mm layer, 3 walls, 30% infill](https://makerworld.bblmw.com/makerworld/model/US4dfda5f3f35890/design/2023-11-08_91b801725d4b4.jpg?image_process=resize,w_100/format,webp)
[PETG] 0.2mm layer, 3 walls, 30% infill
26 min
1 plate
Boost
54
103
17
1
134
117
Released
Description
Wire Stripper - Utility Blade
Works great! M3 nut and screw secures the blade.
Comment & Rating (17)
All
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
Worked almost too well! Testing it out with a new blade and I found it easy to cut too deep. Total operator error. I dulled the blade a bit with a file and marked the slot to use. Works great and saved me some $
The designer has replied
1
Reply
Glad you like it! It prints so fast and quick and works great.
(Edited)1
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
Nice tool!
1
Reply
Boosted
Print Profile
[PETG] 0.2mm layer, 3 walls, 30% infill
great print, perfect fit and very useful tool
0
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
I absolutely love this tool! works as well or better than any other wire stripping tool that I own. This is pretty much a must print for anyone besides electricians.
The designer has replied
1
Reply
Yes. and unlike those store bought wire strippers that always get misaligned or damaged in a year or so, just print a new one for almost nothing.
(Edited)1
Reply
Replying to @MofWI
And if it ever gets dull, switch in another blade at the cost of like 1/2 a penny!
(Edited)1
Reply
Replying to @matt4821
it'd be interesting to see if a PLA or the PETG one holds up best.
(Edited)1
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
bei zweiten Versuch klappt der Druck. keine Ahnung warum der erste Versuch nicht geklappt hat
0
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
The designer has replied
1
Reply
Thank you for the 5 star review! I'm glad you like the print!
(Edited)1
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
1
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
1
Reply
Print Profile
25 Min 0.2mm layer, 2 walls, 50% infill
1
Reply
Print Profile
[PETG] 0.2mm layer, 3 walls, 30% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld